question
Hello,
I am restoring a '69 Charger, and I have a question about attaching the new rear 1/4 panels to the car (Year One replacements). Since they are rather large, do I overlap them over the ...
Can anyone tell me the physical difference between stock Ford wire wheels and Kelsey/Hayes wire wheels?
TNX Gary
Flatheads Forever
hello, i have an old american car i think is worth saving; however, i don't really have much money at the moment, and in the meantime the car is slowly accumulating rust and the interior is deter...
After removing the bumperettes on my 52 Vicky there is a spot where the chrome is missing and the spot is semi rusted. The spot is about the size of a quarter. I have no plans on replacing the bumpere...
I am in the process of storing several old mustangs. Does anyone have any info. on the dangers or negative points of leaving them covered with a tarp? I have heard that doing so can cause rust problem...
The size of your engine compartment is directly proportional to the size of your blowtorch
If you are wanting to update the drivetrain, most things are possible, but it would take a bit of work....
Does anyone know if a chevy 216 will bolt up to my 54 chevy Bel Aire? ( which currently has a 235 which is out of commission) I am a high school kid and don't have the money or resources to rebui...
thanks to everyone for the quick advice about my 371 engine. I think I will keep the motor and repair or find a new head for it. on another note does anyone out there know of any aftermarket camshafts...
What other 59-60 GM auto windshields interchange with the 60 Impala. Any info
I recently acquired a 1964 Plymouth Barracuda. The body and frame are sound, but the original 273 c.i. V8 is cracked. I was hoping to replace it with a new Mopar Performance Magnum 360. I've hear...
My 57 Chevy Belair was an original factory air car and had the humongous heater fan combined with the A/C Evaporator. I've since installed an under-the-dash add on unit and would like to install ...
I have a chance to buy a one owner 1971 Buick Electra 225 (4 door, 455 engine, etc) that is in wonderful condition with 88K miles on it. I am looking to buy it for my son for his everyday use - could ...
I am overhauling a D24 flathead and am at the point of starting re-assembly. This afternoon while stripping parts off a scrap D24 block, I removed the brass fitting (which goes into the oil galley) fo...
I don't know, but here are some folks who do:
www.stoveboltengineco.com
http://www.classicar.com/vendors/patricks/convert.htm
- Wayne
I might remind you that partial information will lead to incorrect answers. Look at your question and ask yourself if it is a complete question of a serious investigator or a question that a 15 year o...
Phil, welcome to the forum I hope you will like it here.
I am not sure though what the question is. Are you looking for DIY mechanics to fix this?
You posted this question about a year ago.
You didn't like my answers then, so I wont repeat them.
i have a question would parts be compatible with a '61?its a ninety eight 4 door ht with pw and ps
Thanks for translation I try to translate my question.
Bruno GAZAN
Martyn J Culling a écrit dans le message
Hey Eric,
Going to need alot more details if you want a correct answer to your question.
I'll aweait your next detailed posting.
Yours in Fords,
Bill S.
This is all well and good, but it doesn't answer the question, what is a Victoria? Is it a random name? Was it Henry's wife? Daughter? Girlfriend? Or just a name? tom kan pa
Here's a simple question...do 1952 Chevy's have a 6 or 12 volt electrical system? Also, any specifics you can provide regarding the kind of battery (amp etc.) they need would be appreciated....
... you'll have a problem with the paint atomizing correctly, but here are a couple of sites to post your question to..www.autobodystor.com and www.autobodypro.com
Mike...
my son and i are putting a '53 customline back together and have a question on putting a 302 in it w/c-4. do you use the stock motor mount adapted to the frame?
thanks.
... at the newsgroup rec.autos.makers.vw.aircooled, but feel that this group might offer a better answer to my question. And let me also say that like and educated 'netter, I *did* go to deja news a...
...ld it in '72 i still got service manual for it. i also know the mechanics inside and out if you need a question answered... have fun...
Because modifying is fun.It makes us solve problems and gives us a unique creation.Unless the MGA in question has some particular history behind it,it's not so rare that building it up would be b...
... would be able to do pieces the size of your trim. This was some time ago, so you would need to re-post the question....
...39;72 Blazer is clearly in need of new piston rings. Burns lots of oil and the compression test says so. My question is: How do I determine if I can get away with just honing the cylinders and putting...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Antique Cars Club |
TIP: Write your question in details [ why? ]
Latest Posts
|
more posts...