rear
looking for a rear right fender for a 37 chevy 2 door sedan.
Hello,
I am restoring a '69 Charger, and I have a question about attaching the new rear 1/4 panels to the car (Year One replacements). Since they are rather large, do I overlap them over the ...
how do i remove the windows and install new
Need one of above, email or post with price, location, shipping charges, etc.
TIA, Kyle Merkel
... a cable from the pedal to a point under the car then there is a 'y' that goes to each of the rear wheels. If you do not have two cables to the rear wheels then one is missing. The emergency...
... R-200 is like today's Freightliners and Peterbilts except it is for lighter work. It only has one rear axle but it does have dual rear wheels. It has a 5th wheel hitch just like any other big ri...
...for my 1957 Dodge Custom Royal. Unfortunately, I do not have parts' numbers right now:
1. Dual rear radio aerials. 2. Spear for right side tail fin insignia. 3. Rear radio speaker.
I am l...
58-64 Impala Complete 2" Drop Front and Rear Disc Brake Conversion kit w/ Billet Aluminum Hydromax Combo
Details
58 59 60 61 62 63 64 Impala, COMPLETE FRONT AND REAR Kits, 2” DROP, ...
... split window was part of a design effort to make a strong longitudinal line that carried from front to rear. At the time, it was much derided, both aesthetically as well as some saying it caused too ...
Hi Steve,
Rear end was sold today. It was complete.
Thanks,
-ERIC
what rear?, what motor?, what trans?, what interior? this car can be worth anywhere from $200 -$20,000.
This may very well be normal. The Impala is a long car with substantial front and rear overhang. It is set up (panel fit) with its weight on the wheels for straight clearance. When you put it up on di...
...old Ford cards, Victoria is a hardtop, either two or four door, without a post separating the front and rear windows....
Could anyone help me find a left rear wind up window for a 1937 Master Sedan?
They do not seem to be all that common in Australia!! (Gee, now, that's a surprise!!)
Frank McLeod
I have a 1939 sedan delivery project 350/350 with mustang II front end and 10 bolt chevy rear up for sale.
1961 Rambler American Station Wagon, 6 cyl. 3 on the tree. Rear seat folded forward, front seats folded back. Never could get into the drive-in with that car.
... steel plate also might be under the hood on the data plate if you cant find it there try removeing the rear upper seat and looking for the build papers...
...and backseat window glass for a '49 Chevy Fleetline Deluxe 2-Door Sedan/ Also in need of front and rear bumpers...HELP...
...al number of the frame, which was the same as the last 6 or 7 digits of the VIN, on the top of the left rear frame rail, next to the trunk floor. This was not the same number as the body number on the...
...e 1950's, it was the little Fiat 500 with a row of seats added at the front (the engine was in the rear) so the whole front, including the steering wheel, was actually a door. Is this what you ha...
A relative of mine has been trying to find the rear door (especially the left) weatherstrip for a 1956 Olds 98 Holiday 4-door. It is the piece that runs around the lower part of the door, with special...
... with a 1931 Model A tudor sedan.
We need to have the correct length, measured from front fender to rear fender, of the running boards. The current fenders are in too poor condition to use to meas...
...nterior fair to good, body fair to good, needs P.S. floor work, minor frame rail rusts, needs front and rear valances, has GT wheels (no caps).
Thanks,
-ERIC
83 GT 68 XR7 69 Mach I (maybe!...
...p in Kuala Lumpur,Malaysia that does bodyworks and paintings my Minor 1000.
I also want to upgrade my rear axle to produce higher speed. Can you guys out there suggest an equivelant model without ma...
Would like to sell fully loaded 1968 Chevelle. Street legal but loaded for the strip. Would appreciate any info on getting this sold, other sites to list, etc. Here is description of car: (sorry for t...
...er running gear. The truck is not running. In fact I think the engine needs to be re-positioned and the rear axle moved back a bit. Hoping to find someone who has been through this with a similar vehi...
...d they are very close to the 63 CDV except for the 64 larger engine and minor differences in the front, rear bumpers, and the slanted 64 grill.
On page 1-1 of the 64 Shop Manual is listed all the ...
...e the later units are operated by an external lever. The A-500/518 transmissions are much larger in the rear case and tail- housing area and would require major surgery to the floorboards and torsion ...
...a12 ga. fusible link from the alt to the bat wire for safety.
for your drive shaft measure from the rear end u-joint yoke flats (where the u-bolts go thru) to the center line of the front yoke...
The Content on this site is provided for general information purposes only. Your use of the Content, or any part thereof, is made solely at Your own risk and responsibility. By entering this site you declare you read and agreed to its Terms, Rules & Privacy.
Copyright © 2006 - 2010 Antique Cars Club |
TIP: Write your question in details [ why? ]
Latest Posts
|
more posts...