Bloggers Wanted
We're looking for people to help with the main blog. If you are consistent, knowledgeable and you're into it, please drop me a note.
|
|
|
|
|
Meta-Memestream
 Fresh Boarder
Posts: 14 
|
|
Anyone have a wiring diagram for this car? I think it has problems in the system but havin a hard time tracing them out. Cant get any spark at all out of it
|
|
The administrator has disabled public write access. |
arrpenterr
Fresh Boarder
Posts: 13
|
|
sorry typed in wrong yr. Its a 1950
|
|
The administrator has disabled public write access. |
AnglesB
Fresh Boarder
Posts: 14
|
|
That shouldn't be a hard problem as the wire from the ign. switch goes to the resistor and from there to the coil. You probably have a burnt
|
|
The administrator has disabled public write access. |
blueshift
Junior Boarder
Posts: 21
|
|
For the '50 I don't think that there is a resistor as the car is a 6V system. You should have 6V at the + side of the coil and you might want to use a pin or needle to test the wire at various points and also check for 6V on the two ends of the fuse for the ign. circuit.
|
|
The administrator has disabled public write access. |
GlobalGurus
Junior Boarder
Posts: 21
|
|
nope...... the resistor checks good with ohm meeter
|
|
The administrator has disabled public write access. |
etitor
Junior Boarder
Posts: 22
|
|
Does the voltage get to the coil? If not, keep going back to the ign. switch until you find the open. You might also check to see if the points are opening and closing as required.
|
|
The administrator has disabled public write access. |
|
|
|
